Trianglewin runs an OEM horse supplies program for brand owners, distributors and sourcing teams who need a factory that reads a specification sheet and builds to it. Operated as a complete OEM equestrian supply service, the program publishes its order parameters in the open — minimums, sample timing, payment terms and monthly capacity — so you can qualify the factory before a purchase order is raised. The page below walks the whole cycle, from family selection to shipped pallet.
Material, colour, size and logo are stated on the product page. Hardware, packaging and stitch detail are not, so they are handled as quote-stage confirmations rather than assumed capabilities.
| Component | Standard program | Fully custom | What to send |
|---|---|---|---|
| Material | Mill options reviewed per project | Custom materials accepted to match brand identity | Performance target plus any test standard |
| Colour | Photographed colours shown on the page | Customer's colour supported | Pantone reference or a physical swatch |
| Size | Full sizes on the size chart in the product description | Customized size option listed on the page | Your graded size chart or measurements |
| Logo | — | Customized logo accepted | Vector artwork (AI, EPS or PDF) |
| Hardware & trim | Quote required | Quote required | Reference photo with dimensions and finish |
| Packaging & labels | Quote required | Quote required | Artwork, barcode and retail requirements |
| Stitching detail | Quote required | Quote required | Close-up reference of the stitch you want repeated |
Rows marked quote required are not stated on the product page. Raise them during the specification review and they will be confirmed or declined before the sample is booked.
These are the representative saddle-pad program parameters published on the product page. Confirm the same figures for any other family when you request the quote.
| Customization | OEM & ODM are welcomed |
|---|---|
| MOQ | 300 pcs per colour |
| Size | Full sizes, plus a customized size option |
| Colour | Pictured colours, or the customer's own colour |
| Logo | Customized logo accepted |
| Sample lead time | 7–10 business days |
| Sample cost | Sample charges and air freight paid by the buyer |
| Payment terms | T/T, L/C at sight, PayPal, Western Union |
| Supply ability | 50,000 pcs per month |
| Price | Quoted per project; the page lists $0.00 until a quote is issued |
Seven stages from first enquiry to shipped pallet, with the steps that sit on your side of the table marked as buyer responsibilities.
Send the product family, quantity per colour, colourway count and target ship date.
Buyer responsibilityThe project is scoped against the 300 pcs per colour minimum, including custom material, colour and logo requests.
Samples run 7–10 business days. Sample charges and air freight are paid by the buyer.
Buyer pays sample & freightSign off colour match, logo placement, size grading and stitching from the physical sample, not from a screen.
Buyer sign-offThe line runs up to 50,000 pcs per month; agree the production window before the run is booked.
Set your inspection points — key measurements, stitch security, trim fixing — before production starts.
Buyer decides the checkpointsT/T, L/C at sight, PayPal or Western Union; freight terms are fixed with the quote.
Custom colour and logo are only worth paying for if the construction holds up. These are the published build features of the saddle pad program, each paired with the decision a buyer has to make about it.
Moisture-transport layers actively wick sweat away from the back.
Ask for the layer stack-up if you sell into hot climates.A shock-absorbing foam core carries load and dampens impact.
Feel the core under a loaded saddle in the sample before approving.Mesh panels optimise airflow and thermal regulation during extended use.
Lock the mesh coverage area into your tech pack.Channels improve spinal clearance and anatomical alignment under pressure.
Match channel width to the gullet of the saddles your customers ride.Reinforced billet straps secure saddle retention, while non-slip silicone grip borders stop the pad shifting.
Specify strap length and hardware finish at quote stage.Modular build enables rapid customization with minimal tooling changes.
Use it to prove a new colourway before committing to a full run.Where you sell and how you launch changes which parameter matters most. Use these five common situations to decide what to lock first in the quote request.
What it stresses: cash exposure and unsold stock risk
Spec to lock: the 300 pcs per colour minimum
Buyer decision: launch one pad shape in one colourway, then extend shades on reorder.
What it stresses: minimums multiply with every extra colour
Spec to lock: the customer's colour option
Buyer decision: fewer colours at deeper quantities now; add shades after the first sell-through.
What it stresses: capacity and calendar
Spec to lock: the 50,000 pcs per month supply ability
Buyer decision: share ship dates at inquiry so production slots can be checked in advance.
What it stresses: heat build-up under the panel
Spec to lock: breathable 3D mesh panels with moisture-wicking layers
Buyer decision: order a sample and test it on a long ride before approving bulk.
What it stresses: pressure and spinal clearance
Spec to lock: high-density foam core plus contour spine channels
Buyer decision: approve only after the sample has been ridden under load.
A complete brief shortens the sample cycle. Cover these points and the first response can carry pricing rather than another round of questions.
Direct lines listed on the product page: sales@brothercatdog.com · +86 13902601489
Keep adjacent product options together for a faster catalog comparison.
Shield your horse from mosquitoes, flies, and gnats with Trianglewin, a trusted manufacturer of premium horse supplies. Engineered for Europe & US riders, these boots feature breathable 350D mesh and…
View product
We are a leading horse boots manufacturer specializing in premium equestrian supplies, including shipping boots, sports medicine boots, and splint boots. Our products are crafted for durability…
View product
As a professional horse boots manufacturer, we specialize in high-performance horse sports boots, custom horse fly boots, and premium horse supplies. We welcome OEM partnerships and produce custom…
View productthe product page lists an moq of 300 pcs per colour. because each colourway carries its own minimum, plan the first collection around a small number of colours and add shade extensions once volumes are proven. confirm the figure for the specific family you are quoting.
sample lead time is listed as 7–10 business days. sample charges and the air freight for the sample are paid by the buyer, so budget for both when you plan a launch date.
yes. the page states that oem and odm are welcomed, customized logo is accepted, the customer's colour is supported and a customized size option is listed. send vector artwork for logos, a pantone reference or physical swatch for colours, and your graded size chart for sizing.
t/t, l/c at sight, paypal and western union are listed on the product page. terms are agreed at quote stage, so confirm the schedule that applies to your order value and destination.
the factory states a supply ability of up to 50,000 pcs per month. share your target ship dates with the inquiry so production slots can be checked against that capacity before you commit.
send the product family, quantity per colour, colourway count, logo artwork, any size chart, target ship date and destination. use the quote button on the product page or the contact page; sales@brothercatdog.com and +86 13902601489 are also listed.
